Free Download For All

Not to Have Windows 10 ?? Download here ...

NB: Be ye sure, any errors in the installation process is not our responsibility. Please read back well this tutorial. If you've followed these steps correctly, the exact data you will be saved. Thank you.

Here is a tutorial how to install windows 10:

1. IMPORTANT! First of all, learn first before your windows partition system. In general, a laptop / PC has 2 disk partition that ordinary people call Drive C and Drive D. Know the difference? Drive C is usually the system partition and drive D is the drive data. However, most people always misunderstand the C drive and always put the data there. All you have to do first before installing windows 10 is, MAKE SURE YOU SECURE DATA. Immediately you start to backup all data from the Desktop, My Documents, etc. Move to Drive D all of them without exception. Suggested to the Program Files folder do not need to backup everything, it would be better if you will install it using the master installer finishes after Windows 10 is installed.

2. If everything is done, please create a bootable windows. Bootable windows here means pal must make installer Windows 10 into a media. The media may be a stick or DVD. How to? First, prepare the first drive. To try 4GB flash up and to try to burn a DVD (4.7GB). Do to CD !! Because sizenya only 700MB. Here I will practice using the flash.

3.Plug your flash drive into a PC / laptop and then run software Rufus. Download Rufus here.

4.Select your flash drive and then select the ISO file of Windows 10 also downloaded here.

5. Select the start menu and wait for it to finish. If so, close rufusnya and not revoked flashdisk.

6. Please restart your PC and then if it has started the start, press the hotkey to enter the system BIOS. The hotkey can stare at the bottom right corner of your PC. Is it the bios? Roughly it can be concluded that the BIOS type of the original settings before you boot the PC. By default, the hotkey to enter the BIOS is diverse ranging from the F2, F4, F10, F8, F12 and DEL depending on the brand PC respectively. Try rather quickly pressed so that the process is not missed. If late, please re-restart. For this process make sure the flash you in a state of plugged.

7. Furthermore, if it managed to enter the BIOS sure you will find the look that blue-blue. Then, go to the Boot tab and find the boot options / boot order. Setting the boot order so that you removeable disk option (if no, just look for the brand name of the flash you an example: Kingston or others) you can be at the top. Followed by the hard drive / hard drive (if it does not find that there was no frills HDD or hard drive brand you an example: Hitachi) on the second option.

8. If it had been arranged that way, do save and exit the F4 or F10 key (depending on BIOS brand) please read the rules of its key next to the lower right corner.

9. After the save process is complete, it will return to restart your PC. However, what will you find after this is a Windows installer logo 10. Hmm, have started ya hehe serious process.

10. Up here, select the language you want to use. The rest leave it alone. Then click install now.

11. Well now you will be faced with serial input. DO NOT PANIC !! You do not need to find a serial search again. Skip enough alone.

12. Furthermore, there are 2 installation options. Select only the costumes. And, you will go to the partition settings. For this session, please note well. You will find any partitions that will exist on your PC. Now, select your C drive. DO TO WRONG or data you are in the partition D will also be lost. In my screenshot below, incidentally size of my C drive is 20GB. So, why would I format. Select the format menu and then yes. Wait a minute, then make sure the drive is being terselect / selected earlier is the C drive. Then please click next to proceed, not to be wrong.

13. The installation process is ongoing. This process will take up to 20-30 minutes.

14. If you have, your PC will automatically restart. IMPORTANT !! While doing the restart process and will appear for the brand logo PC / laptop you immediately unplug flashdisk !! Or the installation process will return repeated. Complicated it if repeat again.

15. Wait until the restart process approximately 10 minutes, if it is then it will return automatically restart. After that, you will come back again faced with a choice of serial.

16. Select only do this later then will be redirected to the settings menu. Select Use Express Settings button in order not complicated anymore hehe. Wait a minute until the process is complete the automatic settings.

17. Furthermore, there is another question, "Who owns this PC?" Select course I own it the next.

18. Now, you will be asked to log in with a Microsoft account. Skip wrote enough, if you want to log quite done later after all selesai.

19. In the Create User Accounts section, fill in your name and password. If you do not want berpassword, simply leave just then next.

20. Loading Wait a minute, then you will be redirected to the Windows.

21. Done!